我公司生产的燃气热水器风机具有以下特点:1.宽调速范围:采用PWM,转速1300-2800rpm/min无级可调速,使氧气和燃气与最佳比例混合,让燃烧更充分,更节能;2..结构紧凑:采用电机埋入式结构,整机厚度才58mm,是生产超薄型热水器的首选.3.寿命长,噪音小,静平衡和动平衡好等电压DC  24V电流1.3A(MAX)转速2800RPM风量78CFM 机型MODEL：PB2410040HB2M（普通型）1、Dimension（外形尺寸）                         154×145×58mm2、Bearing System（轴承）                         2 Ball Bearing3、Rated Voltage（额定电压）                       24V   DC4、Operating Voltage（工作电压）                   20-30VDC5、Starting  Voltage（启动电压）                   18VDC     6、Input Current（额定电流）                        1.3A(MAX)7、Input Power（额定功率）                        31.2W8、Speed（转速）                                 2800+/-10%RPM／MIN9、Speed Control（转速控制）                 PWM或DC   0-5V10、Air Flow（风量）                             78CFM（2.2M3／MIN）            11、Static Air Pressure（风压）                      72mmH2O(705Pa)12、Noise Level（噪音）                                 56 dBA13、Frequency Generator(反馈信号)                  YES14、AUTORSTART（堵转保护）                           Yes15、ALARM OUTPUT (报警信号输出)                No16、LIFE EXPECTANCE(寿命)                      45,000Hours continuous operating17、ROTATION (旋转方向)                         Deasil, Air Discharged18、LEAD WIRE (线束) <可依客户要求>              UL1007#  AWG #22*650mm+/-20mm                                                 (+)RED, (-)BLUE, (Control)YELLOW，(FG)WHITE19、CONNECTOR (连接器) <可依客户要求>          NO20、NET WEIGHT(净重)                                         650g／pcs21、PACKING（包装）                                          24pcs／box  其他详细信息请访问我公司网站：www.zhpnc.com.cn