1 kg grease pump LAGG 1M  Contamination-free grease lubrication The manual grease pump LAGG 1M facilitates clean and easy grease lubrication of bearings. The pump has been especially designed for use in combination with SKF 1 kg grease cans. It seals the grease can, minimising grease contamination and slowing down the oxidation process.The LAGG 1M is suitable for use with greases of consistency classes ranging from 1 up to 3 NLGI. Airtight seal of the grease can, which slows down the oxidation process.Greatly minimises the risk of grease contamination when compared to lubrication by operator's hand out of the grease can.The pump is equipped with a locking mechanism.The design of the pump helps ensure that virtually no residual grease remains in the can, making it economic to use and environmentally friendly.Minimises user skin contact with the grease, which reduces the possibility of an allergic reaction to petroleum-based products.Tested and approved for use with all SKF bearing greases.Sturdy design for long service life.  Technical Specifications Designation  LAGG 1M Body pump material  Polypropylene / Polyethylene,compatible with all SKF greases Follower plate material  NBR, compatible with all SKF greases Weight  230 g (0.5 lb) Volume per stroke  26 cm? (1.6 in?) Suitable can dimensions  Inside diameter 105 - 108 mm (4.1 - 4.25 in) Maximum inside height  145 mm (5.7 in) Suitable greases consistencies