和DPM监控仪表配套使用Service:Air and compatible gases, any type particulate.Wetted Materials:304SS and PTFE.Minimum Detection:5.0 pA.Temperature Limits:Ambient: Maximum -40 to 392°F (-40 to 200°C) (Maximum must be calculated for each application).Process:See Model Chart onOrdering Page.Pressure Limits:Standard: Full vacuum to 10 psi (0.69 bar); Optional: 100 psi (6.89 bar).Output Signal:pA.Electrical Connection:Low noise coaxial.Process Connection:See Model Chart onOrdering Page.Enclosure:Standard: Painted cast aluminum, Weatherproof, NEMA 4X; Optional: Intrinsically Safe, CSA.Weight:Varies depending on length of probe and type of mount.Agency Approvals:CE, CSA.选型表ExamplePMSA11T1P1L1.5PMS-A1P1T1P1-L1.5 Particulate Sensor, weatherproof, NEMA 4X, 1/2" NPTconnection, 250°F max. temp., 10 psi max. pressure, 1.5" probe.Series DesignatorPMS     PMS Particulate SensorEnclosure Rating A1AHZ1    Weatherproof, NEMA 4XIntrinsically Safe, CSA & CE Approvals, Class I, II and III, Divisions I & II, AllGroups, NEMA 4X (requires sanitary connection or flange mount).Process Connection  1234   1/2" NPT1.5" Sanitary Connection2" 150# ANSI Flange2" 150# ANSI Flange with Process Mating Flange and Installation Kit.Maximum ProcessTemperature   T1T2T3T4  250°F (121°C)450°F (232°C)800°F (426°C) -requires flange mount1200°F (649°C) - requires flange mountMaximum ProcessPressure    P1P2 10 psi100 psi - requires flange mountInsertion Length(recommended atleast 1/2 duct diameter)     L1.5L03L05L10L15L20L30L36L48L60L721.5" Probe3" Probe5" Probe10" Probe15" Probe20" Probe30" Probe36" Probe48" Probe60" Probe72" Probe