ZCM--16032A                                                   *160x32Dots * Controller LSI built-in * +5V single power supplyEXTERNAL  DIMENSIONS  AND  DISPLAY  PATTERN      Unit:mm   MECHANICAL DATA(Nominal dimensions)                                 PIN    CONNECTIONModul  size-----------------122.0W×45.0H×11.0D      mmPin  No.SymbolLevel          FunctionEffective display area----------------100.0W×24.0H     mm1Vss--0VCharacter size (5×8dot)------------3.0W×5.5H    mm2Vdd--+5VCharacter  pitch----------------------0.56WX0.64H  mm3Vo----Dot  size--------------------------------0.52W×0.60H     mmWeight-----------------------------------------about  40      g 4 RSH/LL:Instruction codeInputH:Data inputABSOLUTE  MAXIMUM  RATINGS     MIN        MAX5R/WH/LH:Data readL:Data writePower  supply for  logic(Vdd-Vss)---------------0          7.0 V6EH.H-LEnable singnalPower  supply for LCD drive (Vdd-V0)---------0          5.0 VInput  voltage(Vi)----------------------------------Vss      Vdd V7D0H/LData bus lineOperating temperature (Ta)------------------------0          55℃8D1H/LStorage    temperature (Tstg)-----------------     -20         60℃9D2H/LELECTRICAL  CHARACTERISTICS10D3H/LTa=25℃, Vdd=5.0+0.25V11D4H/LInput  'high'  voltage(ViH)---------------------------3.5V min.12D5H/LInput  'low'  voltage(Vil)----------------------------0.55V max.13D6H/LOutput  'high'  voltage(VoH)(-IoH=0.1mA)------3.75V min.14D7H/LPower  supply current(Idd)(Vdd=5.0V)-----------2.0mAmax.15LED_-Power supply for LEDPower  supply current(Idd)(Vdd=5.0V)-----------2.0mAmax.16LED++Power supply for LEDDrive  method--------------------------------1/32Duty, 1/6Bias.                               *In case of 4 bits instruction,data is transferred by twice using only 4 buses of D4-D7, and D0-D3 are not used,first operation is higher order 4 bits and    second is lower 4 bits of 8 bits,but in case of 8 bits instruction,data is transferred by data by data bus of D0-D7