SpecificationsModelAO-GLP-JG09Wavelength(nm)532Output power(mW)﹥200，300，400，500，600mWBeam divergence(mrad)1.0-1.2mradTransverse modeTEM00Beam diameter(mm)1.0-1.2mm(at output aperture)Dimension(mm)￠40×220Laser power supply1×3.7V  18650 BatteryOperating temperature(℃)15-35Operating modeCWLifetime﹥5000hoursNet weight0.2㎏ApplicationsFluorescence Excitation,Direction IndicatorLong Distance,Tracks Detection,Star pointingWarranty time6 monthsOperation:①     Open the back cover,install the battey(18650 Battery)with the negative(-)side facing toward the spring,and then close the back cover.②     Unlock the laser pointer with the key,the indicating LED will turn togreen,which means the laser pointer is ready to work.③ Open the blocking baffle at the output aperture.④ Turn on the laser pointer with the red button.The indicating LED will  Turn to red,which means the laser pointer is working now.Caution:①     Please notice the polarity when installing the battery,incorrect installation will cause none output.②     The laser pointer will automatically shut down after 2 minutesUsing,to protect the optical parts from damaged.③     Please never point the laser to human being,especially to the eyes!④     Please lock the pointer,and remove the battery when storing the laserPointer.⑤     The laser pointer is fragile device,please avoid shocking when using and storing.⑥     Please store the laser pointer in the environment without static and humidity.⑦     Disassemble the pointer without our permission is prohibitive.We will not be responsible for the damage caused by prohibitive operations.