大功率CO2激光器　　国际先进独立高压开关电源激励技术与轴向快速流动技术的完美结合。　　严格的国际激光行业生产工艺标准　　高光束质量、高稳定性　　一体模块化全封闭设计结构紧凑、免维护极高的光电转换效率节省20％～30％的用电量极低的激光气体消耗量，气体消耗量比传统CO2激光器低25％～30％。　　科技为先、以人为本的设计理念。TK-SM High Power Industrially Used LaserState-of-the-art independent high-voltage switching power supply excitation technology and fast axial flow technology are used.Rigidly comply with international technological standards.Superior quality of laser beam and high stabilityModular and fully closed design and compact structure, maintenance free.Very high photoelectric conversion efficiency; it can save 20％to 30％power consumption compared with traditional laser.Extremely low laser gas consumption; it can can save 25％to 30％gas consumption compared with traditional laser.TK－SMCD系列激光模切板切割系统组成技术参数特点>>TK－SM系列工业CO2激光器>>两轴半联动数控机床>>进口红外光束传递变换单元>>TK系类激光专用冷水机组>>无油空气压缩冷冻干燥系统>>激光工作气体组>>自动编程软件>>稳压电源(选件)>>激光功率：1200W、1800W、2000W>>可加工刀模最大尺寸：1250mm×1250mm、1200mm×1800mm或1250mm×2500mm>>X、Y轴定位精度：±0.03mm/m;>>X、Y轴重复定位精度：±0.005mm；>>可加工刀模缝宽：0.35mm、0.45mm、0.53mm、0.71mm、1.05mm>>可加工模板厚度：≤20mm>>加工速度：1.3m/min～2.2m/min>>采用TK-SM系列轴向快速流动CO2激光器，光束质量好、效率高、省电省气！（使用成本低）>>激光切割可连续波切割、脉冲切割、超强脉冲切割三种方式任选，并可互相之间随意转换；>>采用恒光程结构光束传递变换单元，切缝均匀，一致性好；>>采用模切板专用CAD/CAM自动编程软件，可切割拼图、商标等任意图形；>>切割头焦点随动系统，可保证焦点高度不变。 TK－SMCD Series Laser Die-board Cutting SystemComponentsTechnical SpecificationsFeatures>> Two and one half dimensional numerically controlled positioning table>>Imported light beam transmission and transforming unit>>TK cooling water chiller>>Oil-free drying and cooling air compressor system>>Oil-free drying and cooling air compressor system>>Laser working gases>>Automatic programming software>>Stabilized voltage supply (optional)>> Laser power: 1200W, 1800W, 2000W.>>Maximum size of processed die-board:1250mm×1250mm1200mm×1800mm1250mm×2500mm available).>>Precision of X,Y axis positioning: ±0.03mm/m.> Precision of X,Y axis repeated positioning: ±0.005mm.±0.005mm；>>> Kerf width of cutting :0.35mm、0.45mm、0.53mm、0.71mm、1.05mm>>Thickness of die-board: ≤20mm≤20mm>>Cutting speed: 1.3m/min～2.2m/min:1.3m/min～2.2m/min>>Using TK-SM fast axial flowing CO2 Laser, enjoying excellent beam quality, high efficiency, low power and gas consumption, and low use cost.Three laser cutting modes: automatic switching: continuous wave cutting, gate pulse cutting and enhanced pulse cutting.>> Using constant optical path structured light beam transmission and transforming unit, uniform cutting seam and good consistency.>>Using constant optical path structured light beam transmission and transforming unit, uniform cutting seam and good consistency.>> Using specially designed CAD/CAM software for die-board, cutting any shapes, including figures and trade marks.>>Cutting head focus servo system, keeping constant position of focus point