本品适用于电工、电子、仪器仪表及其它产品、零部件及材料在高、低温环境下贮存、运输、使用时的高低温适应性试验。This products is suitable for high/low temperature adaptability tests for Electric, Electronic Instruments, meters and other products, spare parts and materials, in stock, transport and useing in high/low temperature environment. 特点：Features:●制冷技术Refrigeration Technique制冷专家法国泰康/德国谷轮与我们一道设计开发制冷解决方案；保障制冷的长效性并确保符合环保要求。Together with French “Taikang”/ Germany “Cooling” Expert of refrigeration, we designed and developed refrigeration plan to keep longer refrigeration and to be according to environment protection.使用常规的制冷技术，可以轻松达到-20～+150℃ -40～+150℃ -70～+150℃-85～+150℃等不同的级别试验温度要求。By regular refrigeration technique, it is easy to satisfy different grade test temperature request, such as -20～+150℃  -40～+150℃  -70～+150℃-85～+150℃etc.使用液氮制冷技术，可以做到超常规要求的-180℃～+150℃的要求。By liquid Nitrogen refrigeration technique, we can satisfy -180℃～+150℃.●腔体湿度控制技术Chamber humidity controlling technique专业的箱体构造设计结合高品质进口温度、湿度传感器和控制仪表，使工作腔体的温度和湿度得到精确控制，可以轻松满足常规试验的温度偏差控制要求。同样可以根据客户的要求，提供超高标准的精度控制。Special structure design of chamber, with high quality import temperature, humidity sensor and controlling meter, can be sure of precise of temperature and humidity, it makes easy to control test temperature deviation, and also we can enhance the precise controlling by your request.●控制系统Control System操作自动化、简单化是控制系统设计的方向，使用者可以对试验过程本身的投入更少的精力，而更多的时间用在对试验结果的研究。Operation automatically, simply is the tendency of our control system design, by this you could spend much more time in test result research.控制系统可以选用简单的定温定时控制，也可以选用可多步编程的控制以满足更为复杂的试验要求。Control system can chose simple time and temperature control, also can chose program control for complex test.●制作工艺Process对制作工艺的高标准要求，使我们的产品在外观，部件制作质量方面，达到行业国际标准。Following international standard, our products get up to international quality.●常规产品技术参数：Regular Technical data温度波动度Temp.Fluctuation:±0.5℃（可根据用户需求提高至0.1℃）(As request it can be 0.1℃)温度均匀度Temp.Uniformity:≤2.0℃（可根据用户需求提高至0.1℃）(As request it can be 0.1℃)温度偏差Temp.Warp:±2.0℃（可根据用户需求提高至0.1℃）(As request it can be 0.1℃)升温时间Heat Up Time    2-3℃/min（可根据用户需求提高至10℃以上）(As request it can be 10℃)降温时间Pull Down Time0.7-1℃/min（可根据用户需求提高至10℃以上）(As request it can be 10℃)  规格：Size（深、宽、高）型号ModelSGD-50工作室尺寸(mm)Working Dimensions320×350×450箱体尺寸(mm)Chamber Sizes790×800×1320SGD-100500×400×500970×850×1370SGD-150500×500×600970×950×1470SGD-250520×630×7801060×997×1740SGD-500700×800×9001182×1250×1880SGD-800800×1000×10001250×1500×1930SGD-0101000×1000×10001450×1500×1930（注：尺寸可根据您的要求定制。）(The size can be designed according to your request) ●执行与满足标准及试验方法Standard and Test MethodsGB11158高温试验箱技术条件High temperature test chambers technical conditionsGB10589低温试验箱技术条件Low temperature test chambers technical conditionsGB10592-89高低温试验箱技术条件(温度交变) High/Low temperature testing chambers technical conditions( Temperature Alternating )GB/T2423.1-2001低温试验箱试验方法Low temperature chambers technical testing methodsGB/T2423.2-2001高温试验箱试验方法High temperature chambers technical methodsGB/T2423.22-2001温度变化试验方法Temperature changes testing methodsGJB150.3高温试验High temperature TestGJB150.4低温试验Low temperature Test等国家试验标准And other National test standard. ●安全保护Safety Protection安全配置：漏电保护、短路保护、压缩机超压保护、压缩机过载保护、风机过载保护、超温保护、相序/缺相保护Safety configuration: Current discharge protection,Circuit break protection, Compressor over load protection, Fan over load protection, Over temperature protections, Phase sequence/ Short phase protection.