一．用途Use　用于测试橡胶及其制品的耐臭氧老化性能设备执行（满足）相关标准：JIS K 6259ASTM1149 ISO1431 GB/T7762GB/T13642等It is used to test rubber and rubber products ozone proof functions, and applied to: JIS K 6259ASTM1149 ISO1431 GB/T7762GB/T13642 Etc.二.基本原理Basic Principle　　臭氧在大气中的含量很少却是橡胶龟裂的主要因素，臭氧老化箱模拟和强化大气中的臭氧条件，研究臭氧对橡胶的作用规律，快速鉴定和评价橡胶抗臭氧老化性能与抗臭氧剂防护效能的方法，进而采取有效的防老化措施，以提高橡胶制品的使用寿命。Ozone in air takes up a little proportion, but it is the main reason for crack of rubber, Ozone ageing test chamber imitates and strength the ozone in air, investigate the rule of ozone to rubber and identify, evaluate rubber ozone proof function, then take measures to improve rubber product三.主要特点Main features*符合国际标准的不锈钢试验仓及无声放电制造臭氧的全封闭气体回路,整个臭氧气体的发生和捕捉均是密闭的回路，确保人身安全。It is applied to international standard and keep safety of persons.*在1000pphm的范围内任意设定臭氧浓度。During1000pphm ozone concentration can be set at random.*调速电机驱动试样架装置(满足静态法拉伸试验,试件运行轨迹满足摆线轨迹原理)Speed electric machine drive sample frame configuration( satisfy static stanching test, test products running track is fit for cycloid motion theory)*臭氧浓度自动数显控制仪.Ozone concentration auto digital display controlling instrument.*双光束“QUA”非色散紫外臭氧检测仪.Double light beam QUA out of dispersion ultra ozone detection instrument*数显自动在线测量.Digital display measurement on line automatically.*留有计量检定校正接口.Measurement adjustment interface*臭氧浓度/温湿度设定值控制PID自整定，操作方便可靠.Ozone concentration/temperature and humidity set value controlling PID auto setting*第3代比尔-朗伯测量应用软件.Third generation Bill-lanbo measurement application software*安全门锁控制系统Security gate lock controlling system四.主要技术参数Main technical data*工作室体积：500×500×500Working dimensions: 500×500×500*臭氧浓度:0～1000 pphm(设定直读)Ozone concentration: 0～1000 pphm(设定直读)*臭氧浓度偏差:国标10%Ozone concentration deviation: National standard 10%*试验仓温度：测量范围室温～+80℃Test chamber temperature: Measurement range RT～+80℃*温度均匀度：±2℃Temperatureuniformity:±2℃*相对湿度：测量范围60%以上Relative humidity: test range above 60%*试样架回转速度：0～50mm/sTest sample frame rotary rate: 0～50mm/s*动态拉升频率:0.5HzDynamic rising frequency: 0.5Hz*新型试样架(每个夹具能安装试验件拉伸能满足Ⅰ型哑铃片和实际工件)New test frame ( Each lamp can be set test pieces, it can satisfy dumbbell pieces and real workpieces)*试验气体流量：0-60L/minTesting gas flow: 0-60L/min五.设备主要材质*外壳冷板喷塑/内胆不锈钢。Shell static painting/internal chamber is stainless steel*AI数显智能程控调节仪。Al digital intelligent program adjustment equipment*气体流量计，精确控制各层面气体流量。Gas flow indicator*无声放电臭氧发生器，配“QUA”非色散紫外臭氧检测仪Silent discharge ozone generator, with“QUA” none-dispersion ultra ozone detector  *比尔-朗伯原理测量应用软件(国际公认)。Bill-Lanbo principle testing application software*装有气体净化器，恒温槽，Gas purifier and thermostatic bath*活性碳吸收和硅胶干燥塔。activated carbon adsorption and silica gel drying*含臭氧气流与试样平行。Airflow of ozone with test samples parallel*选配远程监控软件(可用PC机打印试验数据)(selectable) Long distancesupervising software(PC printing test data)*备留有经典化学测试臭氧浓度之接口. Chemical test for ozone concentration interface*内部设置稳压电源stabilized voltage supply inside六.安全保护装置Security protection configuration*电源超载、控制回路过载、短路保护Over power, circuit breaker protection, control loop over load*接地保护,电机过载保护Electrical machine over load protection, ground protection*超温保护Over temperature protection*报警讯响提示Alarming reminder