3M™ EM Aware TNG ESD Event MonitorProperties Typical ValueESD Event Threshold Range 60 – 140 dBuV (default setting: 80 dBuV)R Load 250 OhmRaw Input signal 60 dBu (1mV), Uout = 1.25 V, Iout = 5 mA136.7 dBu (6.8 uV), Uout = 5 V, Iout = 20 mAThe dependence is linearStatic Voltage Range 12.5, 100, 250, 500, 1000 VoltsSignals Uout = 1 V (4 mA for 250 Ohm) for high negative static voltage value rangeUout = 5 V (20 mA for 250 Ohm) for high positive static voltage value rangeIonization Balance Range +/- 5 Volts maxCharge Decay Limit 5 Volts max (10 seconds)R Load 250 OhmDecay 00.0, U = 1 V16.0, U = 2 VThe dependence is linearDecay which is >15.0 does not show on displayAlarm Indicators Buzzer (with disable switch)Operating Environmental Range Temperature: 41ºF, (5ºC) to 104ºF (40ºC)Humidity: 80% R.H. Maximum for temperatures up to 88ºF (31ºC), decreasing linearly to50% relative humidity at 104ºF (40ºC)Dimensions 3.15 in. W x 1.60 in. H x 2.20 in. L (antenna not included)80 mm x 40 mm x 56 mmGround cable 20AWG, multi-strand, OD: 2.5mm, black, #6 ring terminal.Inputs SMA Connector for Bell antenna, or Remote antennaOutputs RJ45 connector, 4 — 20mA analog outputRJ45 connector, relay output at pin7-gnd(PC is not included)Color Silver, Teal GreenDisplay LCD segmentPower Supply Adapter, 12 Vdc , center positive, 0.3A