TC-12 Series Reclosers1、Summary　TC-12 Series outdoor high volt permanent-magnet vacuum automatic Reclosers  are a new generation of multi-function product developed and manufactured by Jiangsu Tianchi Electric Co., Ltd. This product employs advanced technology throughout the whole design. It integrates the functions of control，protection，measurements ，communication，fault detection and on-line monitoring. It can carry out Substation Automation and distribution automation． This product can be used as the switches in 10kV line and 10kV out line of distribution. It can be also used as the switches in poll. It is a suitable choice to realize distribution automation and miniaturization Substation. 2、Technical Features●The TC-12 is equipped with magnetic actuators responsible for opening and closing the recloser`s main contacts thus decreasing the number of parts and increasing the reliability with no power required to keep the contacts open or closed and maintenance free.● Imported outdoor Epoxy Resin is used for insulated material． The device is of light weight，has long life and is able to endure harsh outdoor climates. It has no oil or gas, and so is more environmentally friendly.● Advanced DSP is used in this system. The device integrates the functions of control 、protection 、measurement and communication.● The device uses the integrated sensor technology and can be monitored and measured on-line.● Rich Communication methods. The recloser can communicate through Wireless communications and support English or Chinese short messages.● There are 128 sampling points in a cycle. FFT transform provides high-speed and high-precision data up to 19th harmonics waveforms.● The device has good EMC compatibility. Its EMC meets IV level of the Chinese national standard. It ensures the recloser not to act by accident.● The device can provide independent phase tripping current protection when it communicated to each other with optical cable ，This feature ensures the device to have fault isolation or resume power supply automatically without the centre station. This greatly improves the reliability of power supply.● The device measures and makes corrections according to the temperature inside. This feature made it to have high precision throughout the entire operating temperature range.● The specially designed power supply unit can switch between AC110V and AC220V. The voltages of the batteries can be tested and the charge current or voltage can be controlled.● User interface is very friendly. It supports Chinese language.● The stainless steel cabinet does not rust and makes the device essentially maintenance free.3、Main Functions● Protective Function：This device has instantaneous over-current protection、timing over-current protection、negative sequence over-current protection、directional over-current protection and over-voltage protection.● Measurement：The recloser can measure currents、voltages、kWh、kVARh、power factor and frequency etc.● Control：The recloser can be controlled locally and remotely. The control sequence can also be pre-programmed● Automation：The recloser can implement fault detection、fault isolation、power supply resume and parameters analyze automatically. It can subtract load automatically in low frequency and deliver or cut capacitors automatically. It can report failure in time through Wireless communications or other communication network.● Communication：The recloser provides TCP/IP，DNP3.0，IEC101 protocols. CAN、RS232/485 ports are available and make the recloser ready for external links through Wireless communications.● The recloser can record and save the operation parameters and failure parameters. The protected values and parameters can be set locally or remotely.4、Main Technical Parameters● Rated Voltage：  12kV● Rated Current：  630 (1250) A● Rated frequency：  50Hz● Short time power frequency withstand voltage：42kV（1min）● Lightning impulse withstand voltage：  75kV● Rated short-circuit breaking current：   20kA● Rated short-circuit making current(peak)：   50kA● Short-time withstand current（3s）：  20kA● Rated peak withstand current：　 50kA● Switching operations of rated short-circuit breaking：30次●Main circuit resistance：  ≤ 120 uΩ●Mechanical endurance：  10000次● Rated Current sensor ratio：  600/1(5)● Rated operating sequence：open t1（0.3S）-close open-t2（3S）- close open -t2（3S）-close open - atresia● Operating Voltage： ～220（～110）V● Creep electricity distance ratio   ≥ 31 mm/kV● Operating Temp： -40～+70℃● Weight: 80+50kgTC-12系列重合器一、概述　　TC-12系列户外高压永磁真空自动重合器是本公司综合国内外先进技术、博采众家之长、采用全新设计理念、运用高科技手段、最新研制的新一代重合器。集测量、保护、控制、通讯、故障定位、在线监测等功能于一体，可以方便地实现变电站综合自动化和配网自动化。该新产品既可作为3.5kV变电所主变10kV侧及出线的开关，也可作为配电网的柱上开关，是实现配网自动化和小型化变电所的首选设备。二、特点　　1、采用永磁机构，使部件大量减少，合闸功率大幅度减少，稳定可靠，无须定期维护保养。　　2、采用进口户外环氧树脂作为外绝缘材料，重量轻、寿命长、耐候性好、无油、无SF6，符合环保要求；　　3、采用先进的DSP芯片，集控制、保护、测量、通讯于一体，使系统具有超前设计、超强功能；　　4、采用综合传感器技术，实现装置的在线监测；　　5、通信方式灵活，支持通用无线分组业务，支持中、英文短消息；　　6、每周波多达128点的采样和快速FFT变换，为线路的测量和保护提供了从基波到19次谐波的高速度、高精度数据；　　7、具有良好的电磁兼容性，EMC指标达到国家标准IV级，保证重合器不误动作；　　8、具有快速保护功能，使得配电网在无主站配合情况下，亦能自动完成故障隔离和恢复供电，极大地提高供电可靠性；　　9、采用测温和温度修正技术，使得装置在各种温度条件下都能达到很高的精度；　　10、专门设计的电源管理模块可提供2路辅助电源进线（AC110C或AC220V）的自动转换，监测电池的电压并控制电池充电电压；　　11、界面友好、全中文显示、设置方便；　　12、全不锈钢制造，不锈蚀，真正做到免维护。三、主要功能　　测量：电流、电压、有功功率、无功功率、功率因素、电量、频率等；　　保护：设有无时限电流速断、定时过流、反时限过流；　　控制：可以就地操作和远方摇控，也可以按照预先设定的方案动作；　　自动化：可以自动实现线路的故障定位、故障隔离、恢复供电、参数分析等；　　可以根据要求自动实现低频减载、电容器自动投切等，并通过通用无线分组业务或专用通信网及时报告故障信息；　　通讯：支持TCP/IP协议、支持通用无线分组业务，提供CAN、RS232/485通讯口，支持多种通信规约(DNP3.0、IEC101等)；　　可以记录、储存运行、操作及故障等参数，保护定值及参数设置可现场及远程编程。四、主要技术参数额定工作电压12kV额定电流630(1250)A额定短时(1min)工频耐受电压42kV额定雷电冲击耐受电压75kV额定短路开断电流20kA额定短路关合电流（峰值）50kA热稳定电流(3s)20kA动稳定电流（峰值）50kA额定短路电流开断次数30次主回路电阻≤120μΩ机械次数10000次CT变比600/1(5) 额定操作顺序分-t1(0.3s)-合分-t2(3s)-合分-t3(3s)-合分-闭锁 额定工作电源电压～220(～110)V爬电比距≥31mm/kV使用环境温度-40～+70℃重量80+50kg