模拟存储示波器 Tek 466

厂商:美国泰克

100MHz带宽，双踪，衰减 5mV/div, 扫速 5-ns/div

The 466 Dual Trace Storage Oscilloscope is designed to display non-repetitive or slow moving signals. A portable unit with DC to 100MHz response. Features two modes of storage: Variable Persistence and Fast Transfer. Stored writing speed of 110 div/μsec. Deflection factor from 5 mV /div to 5 V/div in a 1-2-5 sequence. Sweep rate of 5 nsec/div with X10 magnifier. Weighs 26 lbs. CRT mesh filter installed to minimize CRT faceplate radiation. Four signal-output BNC connectors on the rear chamber changes to a type that improves shielding of the connected signal leads. The unit offers reduced scan mode in which the stored writing speed is 3000 div/μs.

技术指标

• Form Factor: Benchtop
• Bandwidth: 100 MHz
• Rise time: 3.5 ns
• Number of Channels: 2 ch
• Min. Vertical Sensitivity: 5 mV/div
• Maximum Vertical Sensitivity: 5 V/div
• Vertical(or Deflection Factor) Accuracy: 3 %
• Input Coupling: AC,DC,GND
• Input Impedance: 1 MOhm
• Maximum Input Voltage: 250 V(dc+p
• Main time base - lowest: 50 ns/div
• Main time base - highest: .5 s/div
• B Sweep Time Base (low): 50 ns/div
• B Sweep Time Base (high): 50 ms/div
• Time base Magnification factor (X?): x10
• Timebase accuracy: 2 %
• Trigger Source: External,Internal
• Trigger Sensitivity: 0.3 mV
• Display Type Color: CRT
• Display Size: 13 cm
• Trace writing speed (Analog Oscilloscope): 3 div/s

测量特性

• X/Y Mode
• Comm Mode Rejection
• Add Mode
• Inverted Trace Shift
• Chopped Mode
• Cascaded
• Trigger Jitter
• Level Control
• Trigger View
• Trace Separation
• Trigger Hold Off
• Differential Time
• Z Axis
• Channel 1 Output

选件

• Option 01 = Delete DM44 Temperature Probe
• Option 04 = Emc Modification
• Option 05 = TV Sync Separator (Provides triggering on TV field)
• Option 07 = Ext Dc Operation (not available with DM44)
• Option 10 = Third Channel Trigger View (Cannot be ordered with Option 05)
• Option DM44 = Built-in DMM