60MHz, 2Ch, Dual trace, 20M sampling/sec
Combination of analog and digital oscilloscope performance.
Maximum 2-channels simultaneous sampling rates of 20MS/s.
Digitized 20MHz repetitive signal equivalent mode
2 K words memory capacity per channel
One-touch switching real time and storage modes
Two save memories
Pre-triggering enable observation of waveform portion before the trigger point.
Roll mode provides continuous observation of slow waveforms
An averaging function provides summation averaging up to 256 times
Linear and sine interpolation function for optimum pulse or sinusoidal signals
Magnification function simplifies detailed waveform observation
CRT readout for displaying set values along with measured voltage, time and frequency using the cursor function
Direct copy of screen display using HP-GL commands with RS-232C interface Delay signal function
CRT - Configuration and useful screen :
6 inch rectangular screen with internal graticule, 8X10div.(1div = 1cm)
marking for measurement of rise time, 2mm subdivisions along the central
axis.
- Acceleration potential : +1.9kv approx.(ref. Cathode)
- Phosphor : P31
- Focusing : provided
- Trace rotation : provided
- Scale illumination : provided
- Intensity control : provided